Reinforced cushion panel: conventional white (other colors can be customized for more than 500 square meters) Specification: length 5000mm×width 242mm*thickness 30mm, with reinforcement ribs in the middle, the wall thickness of the upper layer is 3mm+, the wall thickness of the lower layer is 2.5mm +, weight 20kg/bar+, there are card slots on both sides of the bottom of the panel, it is convenient to buckle and fix with the special connection card on the dovetail slot of the beam, which is convenient for later disassembly and maintenance. In order to prevent the panel from floating, each panel should be no less than 10 card points are fixed, and the gap between two adjacent panels is 10mm after installation, which meets the requirements of national standards. Panel packaging: 2 panels/piece, packed in carton. (Regular white)

Swimming pool cushions, commonly known as pool caissons, are mainly used to fully increase the utilization rate of swimming pools and diving halls. Without changing the structure and function of the original swimming pool, the depth of the swimming pool can be changed, and deep water areas and shallow water areas can be divided. It is suitable for exercise and training for swimmers of all ages, convenient for management and operation, and can also isolate the dirt deposited on the bottom of the pool and keep the pool water clear. All parts of the product are uniformly customized, easy to disassemble and assemble, economical and environmentally friendly, long service life, firm structure, non-toxic and harmless, and meet the installation needs of swimming pools and diving pools of different specifications. It has passed the certification of the National Sporting Goods Quality Supervision and Inspection Center, and It conforms to the national standard of "Swimming Pool Detachable Cushion GB/T28939-2012" and reaches the level of similar foreign products.

Frame structure: the spacing of horizontal bracing is less than or equal to 1250mm, the standard of vertical bracing spacing is 500mm, the load-bearing column and beam are 43% more, the weighing is stronger, the structure is more stable, and it is better than the national standard. It can be cut to size at will, suitable for all kinds of swimming pools. The 80*35*2650mm whole beam does not need to be drilled, and it is used in conjunction with the clamp, which is more convenient to operate. The beam is designed with a rotating shaft and can be sloped at any angle within 90 degrees.

The water and land multifunctional training mat (high stool) is made of fiberglass material. Specification (length, width and height): 1800*600*500mm. The surface of the high stool has a non-slip pattern design, which is non-slip and beautiful. Suitable for rapid conversion between water and water. Underwater is used to elevate local areas and train students. The water can be used for rest benches and locker rooms. It can be stacked and occupies less space, which can meet the requirements of youth training and increase the number of admissions.

Pure black or pure blue panel, length 5000mm×width 242mm*thickness 30mm+, with reinforcement ribs in the middle, upper wall thickness 2.5mm+, lower wall thickness 2.3mm+, weight 17kg/bar+, bottom of the panel There are card slots on both sides, which are convenient to buckle and fix with the special connection card that is stuck on the dovetail groove of the beam. It is convenient for later disassembly and maintenance. In order to prevent the panel from floating, each panel should be fixed with no less than 10 card points, and two adjacent to each other after installation. The gap between the panel and the panel is 10mm. After installation, it is consistent with the original marking line. It can be installed or not (the user can choose). Panel packaging: 2 panels/piece, carton packaging

The columns, horizontal tie rods, longitudinal tie rods and weighing beams in the frame are all made of standard 5-meter long non-standard customized UPVC extruded profiles of 60*60*3mm (square pipe with four-sided dovetail groove, regardless of direction, easy to install), respectively The supporting column in the frame component required for cutting (the height is self-determined, and the material is temporarily cut according to the height of each swimming pool), the distance between the horizontal rods is ≤1250mm, and the distance between the longitudinal rods ≤860mm, which meets the requirements of national standards, The width of each paving cushion is the same.