1/1
Number of views:
1000
Swimming pool insulation film
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Category
Insulation film series
Quantity
-
+
Stock:
0
Product description
Advantages of insulation film:
1. Prevent dust from falling into the swimming pool and reduce cleaning costs.
2. Reduce the evaporation of moisture and chemical components in the pool, reduce the corrosion of water vapor to the swimming pool and equipment, and improve the air environment in the swimming pool.
3. Effectively prevent heat loss. When the swimming pool water temperature is heated every day, it can reduce heating costs by more than 70%, save heat and energy, save energy and reduce emissions and reduce operating costs.
4. Non-toxic and harmless, anti-aging, anti-ultraviolet, anti-corrosion, non-slip, waterproof, anti-bacterial, anti-vibration and compression, environmental protection, durable, high quality and low price
5. The product adopts PE material, which is light, economical and durable. The cost of one-time input is very low. The cost of electricity or gas saved is much higher than the cost of thermal insulation film, because it has been widely used in swimming venues.
Technical Parameters:
1. Insulation film thickness: material 400μm, bubble diameter 16mm, height: 4.0±0.1mm.
2. Modified PE material (polyethylene + UV)
3. Density: ≥0.028g/㎝3
4. Tensile strength: ≥150Kpa
5. Tearing strength: ≥260N/m
6. Water absorption: ≥0.04kg/㎡
7. The four sides of the bread are punched at both ends, and the holes are fixed with plastic buckles, which is convenient for retracting and placing the insulation film.
Previous
Insulation film car
Next
None
Related products
-
Multiplayer podiumThe multi-person podium is made of wood, and the surface is spray-painted as a whole, which is waterproof and rust-proof, strong and durable. The podium is composed of three platforms with different heights. The sizes are: 2*0.5*0.4m; 2*0.5*0.3m; 2*0.5*0.25m, which can satisfy about ten people receiving prizes at the same time. (Size can be customized) Color: white (can be customized) -
Referee whistleFox FOX whistle with lanyard and mouth guard. Various colors. Used for referee whistle, outdoor activities and other venues.
-
Electronic commanderFL-D electronic commander is suitable for international and domestic radio direction finding, orientation, modern pentathlon, bicycle, racing, skiing and other competitions. Equipped with 0.5'1', 2', 3', 4', and 5'six-speed cyclical command mode. This machine adopts high-stability components, a microcomputer control circuit supported by software programs, accurate timing, reliable work, loud and bright playback, power supply adopts a wide voltage (9V-12V) design, and there are 9V (6 AA batteries) batteries inside Box, peripheral power socket. Small size, light weight, easy to use and carry, provide a fair and reliable guarantee for all kinds of competitions and training.
-
Single podiumThe single-person podium is made of welded iron plates, and the surface is sprayed with plastic as a whole, which is waterproof and rust-proof, durable. The podium is composed of three platforms with different heights, with the order of the ranking numbers. (Size can be customized) Color: white (can be customized)
-
Report cardEach set of call cards includes a bracket and a bottom plate. The sign holder is welded by 304 stainless steel square tube. The bottom plate of the sign board adopts a white bottom plate, the size is 350*360mm. Print or paste black or red numbers, short distances consist of 1, 3, 5...29 odd numbers. The long distance is composed of singular numbers 1, 2, 5...69.
-
Hand bellThe handbell is used in long-distance competitions to inform the athletes that there are still 100 meters in the swimming distance. The handbell is a pure copper casting, the bell body is mirror-like, and the sound is clear and loud.
-
Lane sprintSwimming lane signs are made of reinforced plastic. Foldable for easy transportation and storage. The lane signs are divided into three types: loop lanes, sprint lanes, and no entry. Patterns and text are used on both sides to indicate the role of the lane. When in use, it is placed in the middle of the lane or on the starting platform. Warn athletes that when swimming, athletes from both ends of the same lane do not interfere with each other.
-
Foul RecallThe foul recall bar contains two uprights, two embedded parts, and a colorful flag. The column diameters are 38mm and 48mm. They are welded by 304 stainless steel pipes. The height is 2m. The distance from the top 300mm is equipped with a manual retractable device to facilitate the referee to retract and release the foul flag. The top is a stainless steel decorative ball with a threaded hole. The foul flag is 30m in length and can traverse the width of the pool. The pennant is made of waterproof plastic sheet, the size of the three sides is 40*40*20cm, and the pennant's interval is 25cm. The embedded parts are made of 304 stainless steel, which are suitable for 38mm and 48mm columns respectively. Equipped with an upper cover, when the pole is not in use, it is both beautiful and prevents debris from falling into the embedded parts. The embedded part and the foul recall rod are plug-in connection, and the vertical rod can be flexibly rotated for easy disassembly. The foul recall rod is installed at a distance of 5 meters from the end of the pool.
-
Backstroke back stroke markerThe backstroke turn sign post contains two uprights, two embedded parts, and a colorful flag. The column diameters are 38mm and 48mm respectively. They are welded by 304 stainless steel pipes. The height is 2m. The top is equipped with a hook 300mm from the top and a stainless steel decorative ball with a threading hole on the top. The flag color flag is 30m long and can cross the width of the pool. The pennant is made of waterproof plastic sheet, the size of the three sides is 40*40*20cm, and the pennant's interval is 25cm. The embedded parts are made of 304 stainless steel, which are suitable for 38mm and 48mm columns respectively. Equipped with an upper cover, when the pole is not in use, it is both beautiful and prevents debris from falling into the embedded parts. The embedded part and the sign pole are plug-in connection, and the vertical pole can be flexibly rotated for easy disassembly. The backstroke backstroke sign pole is installed at a distance of 5 meters from the end of the pool.
-
Mark lineThe marking line (backstroke backstroke marking line, foul marking line) is 30m in length and can cross the width of the pool. The pennant is made of waterproof plastic sheet, the size of the three sides is 40*40*20cm, and the pennant's interval is 25cm.
-
Insulation film carMaterial: The whole body is made of high-grade anti-corrosion 304 stainless steel.
Insulation film car specifications: length 2.6m-2.8m, width 0.8m, height 0.8m (including bottom pulley, excluding hand wheel). -
Swimming pool insulation filmThe product is made of PE material, which is light, economical, and durable. The cost of one-time input is very low. The cost of electricity or gas saved is much higher than the cost of thermal insulation film, and it has been widely used in swimming pools.
-
Closed panelReinforced cushion panel: conventional white (other colors can be customized for more than 500 square meters) Specification: length 5000mm×width 242mm*thickness 30mm, with reinforcement ribs in the middle, the wall thickness of the upper layer is 3mm+, the wall thickness of the lower layer is 2.5mm +, weight 20kg/bar+, there are card slots on both sides of the bottom of the panel, it is convenient to buckle and fix with the special connection card on the dovetail slot of the beam, which is convenient for later disassembly and maintenance. In order to prevent the panel from floating, each panel should be no less than 10 card points are fixed, and the gap between two adjacent panels is 10mm after installation, which meets the requirements of national standards. Panel packaging: 2 panels/piece, packed in carton. (Regular white)
-
Swimming pool removable cushionSwimming pool cushions, commonly known as pool caissons, are mainly used to fully increase the utilization rate of swimming pools and diving halls. Without changing the structure and function of the original swimming pool, the depth of the swimming pool can be changed, and deep water areas and shallow water areas can be divided. It is suitable for exercise and training for swimmers of all ages, convenient for management and operation, and can also isolate the dirt deposited on the bottom of the pool and keep the pool water clear. All parts of the product are uniformly customized, easy to disassemble and assemble, economical and environmentally friendly, long service life, firm structure, non-toxic and harmless, and meet the installation needs of swimming pools and diving pools of different specifications. It has passed the certification of the National Sporting Goods Quality Supervision and Inspection Center, and It conforms to the national standard of "Swimming Pool Detachable Cushion GB/T28939-2012" and reaches the level of similar foreign products.
-
New swimming pool removable cushionFrame structure: the spacing of horizontal bracing is less than or equal to 1250mm, the standard of vertical bracing spacing is 500mm, the load-bearing column and beam are 43% more, the weighing is stronger, the structure is more stable, and it is better than the national standard. It can be cut to size at will, suitable for all kinds of swimming pools. The 80*35*2650mm whole beam does not need to be drilled, and it is used in conjunction with the clamp, which is more convenient to operate. The beam is designed with a rotating shaft and can be sloped at any angle within 90 degrees.
Zhangkong swimming facilities
Service hotline:
Production base:
Botou City, Hebei Province, China
0319-5488655
在线留言 
Copyright Zhangkong swimming facilities Co., Ltd 冀ICP备********号